Santaquin Foundation Pros logoSantaquin Foundation ProsFoundation Repair · Santaquin, UT
Foundation Crack Repair photo

Santaquin Foundation Pros

Foundation Crack Repair in Santaquin, UT

Foundation crack repair in Santaquin, UT with polyurethane and epoxy injection, same-day fixes, free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Santaquin and nearby communities.

Foundation Crack Repair covers the range from a hairline settlement crack to a diagonal crack spreading from a window corner. Not every crack is the same problem, and the fix depends on which kind you've got.

New-build homes near Spring Lake settle on fill soil and often crack early without it being structural. Freeze-thaw cycles through Santaquin's winters widen existing cracks over time regardless of cause. We diagnose before we inject anything.

What's included

What's included with Foundation Crack Repair

Typically included Optional Customer prep

  • Crack inspection to determine type, width, and likely cause
  • Dime-sized access holes drilled along the crack path
  • Polyurethane or epoxy injection depending on crack behavior
  • Surface finish and a follow-up check for movement
  • Exterior waterproofing if the crack was leaking
  • Monitoring over the following wet season
  • Clear items away from the wall near the crack
  • Note whether the crack is actively leaking or just visible

How it works

How our Foundation Crack Repair process works

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Each crack is examined to determine type, width, and cause.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Debris and loose material are removed from the crack area.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Ports are installed along the crack to allow material injection.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane is injected to fill and bond the crack.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material is removed and the surface is smoothed.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The repair is checked to confirm a watertight and stable seal.

Materials

Materials and methods for Foundation Crack Repair

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds structural cracks back together, restoring some of the wall's original strength.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands into active leaks and water-intrusion cracks common after spring runoff.

  • Injection Ports photo

    Injection Ports

    Set along the crack so material reaches the full depth, not just the surface.

  • Surface Primer photo

    Surface Primer

    Preps the concrete so the sealant actually bonds instead of flaking off later.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Blends the repaired section with the surrounding wall finish.

  • Protective Topcoat photo

    Protective Topcoat

    Shields the repair from the moisture that caused the crack in the first place.

Timeline

How long does a Foundation Crack Repair take?

  1. 01

    Consult and crack inspection

    same day
  2. 02

    Injection repair

    a few hours

  3. 03

    Cure time

    24 hours

    before full load

  4. 04

    Follow-up check

    next wet season

Need a schedule that fits?

Get a Free Estimate

FAQs

Foundation Crack Repair FAQs

Why is there a diagonal crack spreading from my basement window corner?

Window corners concentrate stress, so settlement or soil pressure often shows up there first. A diagonal crack usually means the foundation is moving, not just shrinking.

Is a hairline foundation crack normal in a newer Utah home or should I worry?

Hairline cracks under 1/16 inch that aren't growing are common on new-build fill soil and usually cosmetic. If it's widening or running diagonally, get it checked.

Can I just fill a foundation crack myself with epoxy or do I need a pro?

Store-bought kits work fine for stable hairline cracks. Active leaks or cracks that keep growing need pressure-injected polyurethane applied by a pro to actually stop the water.

How much does foundation crack repair typically cost?

Cost runs per linear foot and depends on crack width, length, and whether it's actively leaking. Simple injections cost far less than cracks tied to structural settlement.

Do I need a permit for crack injection?

No, . Cosmetic sealing and injection repair are typically permit-free since no structural change is involved.

Next step

Get a Foundation Crack Repair estimate in Santaquin

Call Santaquin Foundation Pros at +1 (385) 233-4122 or request a free estimate. Most crack jobs get scheduled and finished the same day.

Home · Contact · Basement Waterproofing

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (385) 233-4122